Discussion:
DD-WRT, Nokia N95 & SIP - help
(too old to reply)
B***@gmail.com
2008-01-30 19:48:59 UTC
Permalink
Hi All,

I have recently flashed my WRT54G v1 to the latest stable release of
the DD-WRT generic firmware. Looks very slick.

I do however have a problem I hope someone can help me with. One of
the devices I want to connect via wifi to the router is my Nokia N95
cellphone which has wifi.

I can web surf via the router just fine, but when my the phone tries
to connect to the SIP server the phone comes up with Cannot connect to
connection network.

Now this did work on the standard linksys firmware, so hopefully it is
just a setting?

I have set the phone to a static IP, and forwarded various ports to
the phone including:
5060
5004
3478
10000

Any help/suggestions appreciated.

Cheers

-Al
Thomas T. Veldhouse
2008-01-30 22:12:45 UTC
Permalink
Post by B***@gmail.com
Hi All,
I have recently flashed my WRT54G v1 to the latest stable release of
the DD-WRT generic firmware. Looks very slick.
I do however have a problem I hope someone can help me with. One of
the devices I want to connect via wifi to the router is my Nokia N95
cellphone which has wifi.
I can web surf via the router just fine, but when my the phone tries
to connect to the SIP server the phone comes up with Cannot connect to
connection network.
Now this did work on the standard linksys firmware, so hopefully it is
just a setting?
I have set the phone to a static IP, and forwarded various ports to
5060
5004
3478
10000
Usually, you need to foward 69, 16384-16482,5060, all UDP to the phone.
Further, it is best to give the 16384-16482 ports (UDP) QoS priority. That
range may be about twice the size it needs to be for one phone line ... that
is the range I use for two SIP lines. Also, make sure no other SIP device on
your network is not relying upon these same ports. It is probably safe to
ignore port 69 altogether, but if your Nokia is the ONLY SIP device, then go
ahead and forward it.
--
Thomas T. Veldhouse

Wishing without work is like fishing without bait.
-- Frank Tyger
B. Wright
2008-01-31 03:13:19 UTC
Permalink
Post by Thomas T. Veldhouse
Post by B***@gmail.com
I have set the phone to a static IP, and forwarded various ports to
5060
5004
3478
10000
Usually, you need to foward 69, 16384-16482,5060, all UDP to the phone.
Further, it is best to give the 16384-16482 ports (UDP) QoS priority. That
range may be about twice the size it needs to be for one phone line ... that
is the range I use for two SIP lines. Also, make sure no other SIP device on
your network is not relying upon these same ports. It is probably safe to
ignore port 69 altogether, but if your Nokia is the ONLY SIP device, then go
ahead and forward it.
Does the N95 support STUN? Just curious because I tried to get
a friend's working real quick and had no luck, but, didn't have much time
to work on it. I don't remember seeing any STUN settings in the menus but
they were a bit convulted and hard to navigate so maybe I missed it. There
also seems to be two identical sets of settings for the sip proxy unless
the one labled "Registration server" was the regular sip proxy and the other
is an inline RTP/audio proxy??

Also seems from a quick search the built in SIP client might be a
bit crap and there are third party clients you can load with better results,
just wondering what anyone's experience is with any of those?
Thomas T. Veldhouse
2008-01-31 16:49:15 UTC
Permalink
Post by B. Wright
Does the N95 support STUN? Just curious because I tried to get
a friend's working real quick and had no luck, but, didn't have much time
to work on it. I don't remember seeing any STUN settings in the menus but
they were a bit convulted and hard to navigate so maybe I missed it. There
also seems to be two identical sets of settings for the sip proxy unless
the one labled "Registration server" was the regular sip proxy and the other
is an inline RTP/audio proxy??
I think if your provider offers an outbound proxy, you don't have to worry
about stun [it is done by the outbound proxy].
Post by B. Wright
Also seems from a quick search the built in SIP client might be a
bit crap and there are third party clients you can load with better results,
just wondering what anyone's experience is with any of those?
Java is the most likely support and that might not peform well enough on the
little procs of the Nokia phone.
--
Thomas T. Veldhouse

Wishing without work is like fishing without bait.
-- Frank Tyger
Loading...